View AM51646C63N_3778312.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

am5 construction contact arrangement miniature switches with high precision am5 (qv) switches 27.8 15.9 10.3 standard type contact gap is 1mm. please consult us if you need more than 1mm contact gap. compliance with rohs directive features ?high precision as a result of designing ideal spring by using computer analysis o.p. 14.7 0.4mm ?reliable design with shock resistance min. 980 m/s 2 ?high inrush resistance 160a ?wide variety of contact ratings and terminal types ?ul/c-ul, enec/vde approved typical application ?home appliances ?vending machines ?amusement and communication equipment ?copies ?general industrial machines 1. silver alloy contact 2. gold clad contact com no nc all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
am5 operation force chart 7th digit of part number/actuator operation force, max. by actuator 34567 pin plunger 0.49n 0.98n 1.96n 2.94n 3.92n short hinge lever 0.59n 1.08n 2.16n 3.14n 4.12n hinge lever 0.29n 0.59n 1.18n 1.77n 2.35n long hinge lever 0.15n 0.29n 0.59n 0.88n 1.18n simulated roller lever 0.29n 0.59n 1.18n 1.77n 2.35n short roller lever 0.59n 1.08n 2.16n 3.14n 4.12n roller lever 0.29n 0.59n 1.18n 1.77n 2.35n terminals .187 quick-connect terminal .187 quick-connect/solder terminal bottom com terminal side com terminal dimensions .187 quick-connect terminal dimensions .187 quick-connect/solder terminal .250 quick-connect terminal bottom com terminal side com terminal dimensions c nc no 2 3 1 c nc no 2 3 1 6.35 3.2 1.55 dia. 6.4 4.75 1.2 r1.2 r0.8 6.35 3.2 6.4 4.75 c nc no 2 3 1 c nc no 2 3 1 6.35 8.05 2 4.15 1.65 dia. +0.1 0 +0.05 ?.07 0.15 +0.1 ?.05 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
am5 ordering information 0.1a type 6a type 11a type 16a type type of switch am5: qv switch contact rating 00: 0.1 a (gold clad) te r minals 1: bottom com, spdt 2: bottom com, spst-nc 3: bottom com, spst-no 4: side com, spdt 5: side com, spst-nc 6: side com, spst-no actuators 0: pin plunger 1: short hinge lever 2: hinge lever 3: long hinge lever 4: simulated roller lever 5: short roller lever 6: roller lever te r minals .187 quick-connect/solder terminal .187 quick-connect terminal a: c: operating force by pin plunger (max.) 3: 0.49 n 4: 0.98 n 5: 1.96 n agency standard 3: ul/c-ul rated, enec/vde approved ex. am5 0 0 1 0 c 5 3 1. not every combination is available. please refer to the table, ?roduct types? 2. please refer to the standard chart regarding agency standard remarks: type of switch am5: qv switch contact rating 06: 6 a (silver alloy) te r minals 1: bottom com, spdt 2: bottom com, spst-nc 3: bottom com, spst-no 4: side com, spdt 5: side com, spst-nc 6: side com, spst-no actuators 0: pin plunger 1: short hinge lever 2: hinge lever 3: long hinge lever 4: simulated roller lever 5: short roller lever 6: roller lever te r minals .187 quick-connect/solder terminal .187 quick-connect terminal a: c: operating force by pin plunger (max.) 3: 0.49 n agency standard 3: ul/c-ul rated, enec/vde approved ex. am5 0 6 1 0 c 5 3 1. not every combination is available. please refer to the table, ?roduct types? 2. please refer to the standard chart regarding agency standard remarks: type of switch am5: qv switch contact rating 11: 11 a (silver alloy) te r minals 1: bottom com, spdt 2: bottom com, spst-nc 3: bottom com, spst-no 4: side com, spdt 5: side com, spst-nc 6: side com, spst-no actuators 0: pin plunger 1: short hinge lever 2: hinge lever 3: long hinge lever 4: simulated roller lever 5: short roller lever 6: roller lever te r minals .187 quick-connect/solder terminal .187 quick-connect terminal .250 quick-connect terminal a: c: d: operating force by pin plunger (max.) 4: 0.98 n agency standard 3: ul/c-ul rated, enec/ vde approved contact cadmium free n: ex. am5 1 1 1 0 c 4 3 n 1. not every combination is available. please refer to the table, ?roduct types? 2. please refer to the standard chart regarding agency standard remarks: type of switch am5: qv switch contact rating 16: 16 a (silver alloy) te r minals 1: bottom com, spdt 2: bottom com, spst-nc 3: bottom com, spst-no 4: side com, spdt 5: side com, spst-nc 6: side com, spst-no actuators 0: pin plunger 1: short hinge lever 2: hinge lever 3: long hinge lever 4: simulated roller lever 5: short roller lever 6: roller lever te r minals .187 quick-connect/solder terminal .187 quick-connect terminal .250 quick-connect terminal a: c: d: operating force by pin plunger (max.) 5: 1.96 n 6: 2.94 n 7: 3.92 n agency standard 3: ul/c-ul rated, enec/ vde approved contact cadmium free n: 1. not every combination is available. please refer to the table, ?roduct types? 2. please refer to the standard chart regarding agency standard remarks: ex. am5 1 6 1 0 c 5 3 n all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
am5 product types 0.1a type (gold clad contact) .187 quick-connect terminal 1) bottom com terminal 2-1) side com terminal actuator operating force, max. contact arrangement contact arrangement spdt spst-nc spst-no pin plunger 0.49n am50010c33 am50020c33 am50030c33 0.98n am50010c43 am50020c43 am50030c43 1.96n am50010c53 am50020c53 am50030c53 short hinge lever 0.59n am50011c33 am50021c33 am50031c33 1.08n am50011c43 am50021c43 am50031c43 2.16n am50011c53 am50021c53 am50031c53 hinge lever 0.29n am50012c33 am50022c33 am50032c33 0.59n am50012c43 am50022c43 am50032c43 1.18n am50012c53 am50022c53 am50032c53 long hinge lever 0.15n am50013c33 am50023c33 am50033c33 0.29n am50013c43 am50023c43 am50033c43 0.59n am50013c53 am50023c53 am50033c53 simulated roller lever 0.29n am50014c33 am50024c33 am50034c33 0.59n am50014c43 am50024c43 am50034c43 1.18n am50014c53 am50024c53 am50034c53 short roller lever 0.59n am50015c33 am50025c33 am50035c33 1.08n am50015c43 am50025c43 am50035c43 2.16n am50015c53 am50025c53 am50035c53 roller lever 0.29n am50016c33 am50026c33 am50036c33 0.59n am50016c43 am50026c43 am50036c43 1.18n am50016c53 am50026c53 am50036c53 actuator operating force, max. contact arrangement contact arrangement spdt spst-nc spst-no pin plunger 0.49n am50040c33 am50050c33 am50060c33 0.98n am50040c43 am50050c43 am50060c43 1.96n am50040c53 am50050c53 am50060c53 short hinge lever 0.59n am50041c33 am50051c33 am50061c33 1.08n am50041c43 am50051c43 am50061c43 2.16n am50041c53 am50051c53 am50061c53 hinge lever 0.29n am50042c33 am50052c33 am50062c33 0.59n am50042c43 am50052c43 am50062c43 1.18n am50042c53 am50052c53 am50062c53 long hinge lever 0.15n am50043c33 am50053c33 am50063c33 0.29n am50043c43 am50053c43 am50063c43 0.59n am50043c53 am50053c53 am50063c53 simulated roller lever 0.29n am50044c33 am50054c33 am50064c33 0.59n am50044c43 am50054c43 am50064c43 1.18n am50044c53 am50054c53 am50064c53 short roller lever 0.59n am50045c33 am50055c33 am50065c33 1.08n am50045c43 am50055c43 am50065c43 2.16n am50045c53 am50055c53 am50065c53 roller lever 0.29n am50046c33 am50056c33 am50066c33 0.59n am50046c43 am50056c43 am50066c43 1.18n am50046c53 am50056c53 am50066c53 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
am5 6a type (silver alloy contact) .187 quick-connect terminal 1) bottom com terminal 2-1) side com terminal remarks: also .187 quick-connect/solder terminal is available. when ordering, change the eighth digit of part number c to a. .187 quick-connect terminal .187 quick-connect/solder terminal am50610c4 am50610a4 11a type (silver alloy contact) .187 quick-connect terminal 1) bottom com terminal 2-1) side com terminal remarks: 1. also .187 quick-connect/solder terminal is available. when ordering, change the eighth digit of part number c to a. .187 quick-connect terminal .187 quick-connect/solder terminal am51110c4 am51110a4 2. .250 quick-connect terminal is available. when ordering, change the eighth digit of part number c to d. .187 quick-connect terminal .250 quick-connect terminal am51110c4 am51110d4 actuator operating force, max. contact arrangement contact arrangement spdt spst-nc spst-no pin plunger 0.49n am50610c33 am50620c33 am50630c33 short hinge lever 0.59n am50611c33 am50621c33 am50631c33 hinge lever 0.29n am50612c33 am50622c33 am50632c33 long hinge lever 0.15n am50613c33 am50623c33 am50633c33 simulated roller lever 0.29n am50614c33 am50624c33 am50634c33 short roller lever 0.59n am50615c33 am50625c33 am50635c33 roller lever 0.29n am50616c33 am50626c33 am50636c33 actuator operating force, max. contact arrangement contact arrangement spdt spst-nc spst-no pin plunger 0.49n am50640c33 am50650c33 am50660c33 short hinge lever 0.59n am50641c33 am50651c33 am50661c33 hinge lever 0.29n am50642c33 am50652c33 am50662c33 long hinge lever 0.15n am50643c33 am50653c33 am50663c33 simulated roller lever 0.29n am50644c33 am50654c33 am50664c33 short roller lever 0.59n am50645c33 am50655c33 am50665c33 roller lever 0.29n am50646c33 am50656c33 am50666c33 actuator operating force, max. contact arrangement contact arrangement spdt spst-nc spst-no pin plunger 0.98n am51110c43n am51120c43n am51130c43n short hinge lever 1.08n am51111c43n am51121c43n am51131c43n hinge lever 0.59n am51112c43n am51122c43n am51132c43n long hinge lever 0.29n am51113c43n am51123c43n am51133c43n simulated roller lever 0.59n am51114c43n am51124c43n am51134c43n short roller lever 1.08n am51115c43n am51125c43n am51135c43n roller lever 0.59n am51116c43n am51126c43n am51136c43n actuator operating force, max. contact arrangement contact arrangement spdt spst-nc spst-no pin plunger 0.98n am51140c43n am51150c43n am51160c43n short hinge lever 1.08n am51141c43n am51151c43n am51161c43n hinge lever 0.59n am51142c43n am51152c43n am51162c43n long hinge lever 0.29n am51143c43n am51153c43n am51163c43n simulated roller lever 0.59n am51144c43n am51154c43n am51164c43n short roller lever 1.08n am51145c43n am51155c43n am51165c43n roller lever 0.59n am51146c43n am51156c43n am51166c43n all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
am5 16a type (silver alloy contact) .187 quick-connect terminal 1) bottom com terminal 2-1) side com terminal remarks: 1. .187 quick-connect/solder terminal is available. when ordering, change the eighth digit of part number c to a. .187 quick-connect terminal .187 quick-connect/solder terminal am51610c5 am51610a5 2. .250 quick-connect terminal is available. when ordering, change the eighth digit of part number c to d. .187 quick-connect terminal .250 quick-connect terminal am51610c5 am51610d5 actuator operating force, max. contact arrangement contact arrangement spdt spst-nc spst-no pin plunger 1.96n am51610c53n am51620c53n am51630c53n 2.94n am51610c63n am51620c63n am51630c63n 3.92n am51610c73n am51620c73n am51630c73n short hinge lever 2.16n am51611c53n am51621c53n am51631c53n 3.14n am51611c63n am51621c63n am51631c63n 4.12n am51611c73n am51621c73n am51631c73n hinge lever 1.18n am51612c53n am51622c53n am51632c53n 1.77n am51612c63n am51622c63n am51632c63n 2.35n am51612c73n am51622c73n am51632c73n long hinge lever 0.59n am51613c53n am51623c53n am51633c53n 0.88n am51613c63n am51623c63n am51633c63n 1.18n am51613c73n am51623c73n am51633c73n simulated roller lever 1.18n am51614c53n am51624c53n am51634c53n 1.77n am51614c63n am51624c63n am51634c63n 2.35n am51614c73n am51624c73n am51634c73n short roller lever 1.18n am51615c53n am51625c53n am51635c53n 3.14n am51615c63n am51625c63n am51635c63n 4.12n am51615c73n am51625c73n am51635c73n roller lever 1.18n am51616c53n am51626c53n am51636c53n 1.77n am51616c63n am51626c63n am51636c63n 2.35n am51616c73n am51626c73n am51636c73n actuator operating force, max. contact arrangement contact arrangement spdt spst-nc spst-no pin plunger 1.96n am51640c53n am51650c53n am51660c53n 2.94n am51640c63n am51650c63n am51660c63n 3.92n am51640c73n am51650c73n am51660c73n short hinge lever 2.16n am51641c53n am51651c53n am51661c53n 3.14n am51641c63n am51651c63n am51661c63n 4.12n am51641c73n am51651c73n am51661c73n hinge lever 1.18n am51642c53n am51652c53n am51662c53n 1.77n am51642c63n am51652c63n am51662c63n 2.35n am51642c73n am51652c73n am51662c73n long hinge lever 0.59n am51643c53n am51653c53n am51663c53n 0.88n am51643c63n am51653c63n am51663c63n 1.18n am51643c73n am51653c73n am51663c73n simulated roller lever 1.18n am51644c53n am51654c53n am51664c53n 1.77n am51644c63n am51654c63n am51664c63n 2.35n am51644c73n am51654c73n am51664c73n short roller lever 2.16n am51645c53n am51655c53n am51665c53n 3.14n am51645c63n am51655c63n am51665c63n 4.12n am51645c73n am51655c73n am51665c73n roller lever 1.18n am51646c53n am51656c53n am51666c53n 1.77n AM51646C63N am51656c63n am51666c63n 2.35n am51646c73n am51656c73n am51666c73n all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
am5 specifications 1. contact rating remark: the inductive load for dc should have a time constant of 7 ms or less. 2. characteristics type voltage resistive load (cos=1) inductive load (cos nearly equal 0.6 to 0.7) gold clad contact 0.1a type 250v ac 0.1a 0.1a 125v ac 0.1a 0.1a 30v dc 0.1a 0.1a silver alloy contact 6a type 250v ac 6a 3a 125v ac 6a 3a 125v dc 0.5a 0.5a 11a type 250v ac 11a 6a 125v ac 11a 6a 125v dc 0.6a 0.6a 16a type 250v ac 16a 10a 125v ac 16a 10a 125v dc 0.6a 0.6a gold clad contact for low level circuit 6v dc 5ma 12v dc 2ma 24v dc 1ma type 16, 11, 6a type (silver alloy) 0.1a type (gold clad) expected life (min.) mechanical 10 7 operations (at 60 cpm) electrical 10 5 operations (at rated load 20 cpm) 10 5 operations (at rated load) 2 10 6 operations (at low-level circuit rating) insulation resistance 100m ? (at 500v dc) dielectric strength between terminals 1,000vrms for 1 min. between terminals and other exposed metal parts 2,000vrms for 1 min. between terminals and ground 2,000vrms for 1 min. contact resistance (initial) 50m ? (by voltage drop at 1a 6 to 8v dc) 50m ? (by voltage drop at 0.1a 6 to 8v dc) vibration resistance (by pin plunger) 10 to 55hz at simple amplitude of 0.75mm (contact opening: max. 1msec.) shock resistance (by pin plunger) (contact opening: max. 1msec.) o.f. 0.49n max. type min. 98m/s 2 o.f. 0.98n max. type min. 196m/s 2 o.f. 1.96n to 3.92n max. type min. 294m/s 2 o.f. 0.15n to 0.49n max. type min. 98m/s 2 o.f. 0.98n max. type min. 196m/s 2 o.f. 1.96n max. type min. 294m/s 2 allowable operating speed 0.1 to 1,000mm/sec. (at pin plunger) maximum operating cycle rate 600cpm ambient temperature ?5 to +105 c (not freezing below 0 c) weight 6.3g d ata gold-clad type range of low-level current voltage 500 100 50 10 5 2 1 4812 16 20 24 dc voltage (v) current (ma) all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
am5 3. operating characteristics pin plunger short hinge lever hinge lever long hinge lever simulated roller lever short roller lever roller lever 7th digit of part no. 34567 operating force, max. 0.49n 0.98n 1.96n 2.94n 3.92n release force, min. 0.12n 0.25n 0.49n 0.74n 0.98n pretravel, max. mm 1.4 movement differential, max. mm 0.4 overtravel, min. mm 1.0 operating position mm 14.7 0.4 7th digit of part no. 34567 operating force, max. 0.59n 1.08n 2.16n 3.14n 4.12n release force, min. 0.098n 0.20n 0.39n 0.59n 0.78n pretravel, max. mm 1.6 movement differential, max. mm 0.5 overtravel, min. mm 0.9 operating position mm 15.3 0.5 7th digit of part no. 34567 operating force, max. 0.29n 0.59n 1.18n 1.77n 2.35n release force, min. 0.049n 0.098n 0.20n 0.29n 0.39n pretravel, max. mm 3.2 movement differential, max. mm 1.0 overtravel, min. mm 1.4 operating position mm 15.3 1.0 7th digit of part no. 34567 operating force, max. 0.15n 0.29n 0.59n 0.88n 1.18n release force, min. 0.025n 0.049n 0.098n 0.15n 0.20n pretravel, max. mm 7.5 movement differential, max. mm 2.0 overtravel, min. mm 2.2 operating position mm 15.3 2.6 7th digit of part no. 34567 operating force, max. 0.29n 0.59n 1.18n 1.77n 2.35n release force, min. 0.049n 0.098n 0.20n 0.29n 0.39n pretravel, max. mm 3.2 movement differential, max. mm 1.0 overtravel, min. mm 1.4 operating position mm 18.5 1.0 7th digit of part no. 34567 operating force, max. 0.59n 1.08n 2.16n 3.14n 4.12n release force, min. 0.098n 0.20n 0.39n 0.59n 0.78n pretravel, max. mm 1.6 movement differential, max. mm 0.5 overtravel, min. mm 0.9 operating position mm 20.7 0.5 7th digit of part no. 34567 operating force, max. 0.29n 0.59n 1.18n 1.77n 2.35n release force, min. 0.049n 0.098n 0.20n 0.29n 0.39n pretravel, max. mm 3.2 movement differential, max. mm 1.0 overtravel, min. mm 1.4 operating position mm 20.7 1.0 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
am5 dimensions mm general tolerance: 0.25 the dimensions other than drawn above are same as pin plunger type. 1. pin plunger bottom com terminal .187 quick-connect terminal .250 quick-connect terminal ( p.t. ) 1.4 max. 10.3 3.95 39.45 ?.05 +0.25 3.1 13.5 3.4 22.2 2.8 1.8 27.8 20.2 2.8 c no nc 1 3 2 0.15 0.1 3.2 6.35 1.55 dia. 6.4 4.75 3.1 dia. +0.25 ?.05 5.65 6.5 6.65 9.3 4.1 0.5 2.8 10.3 0.1 15.9 14.7 ( o.p. ) 0.4 12 42.7 3.4 22.2 2.8 1.8 27.8 20.2 2.8 c no nc 1 3 2 0.15 0.1 1 2 -0.05 +0.1 8.05 4.15 ?.07 +0.05 6.35 0.15 ( p.t. ) 1.4 max. 10.3 3.95 ?.05 +0.25 3.1 2.8 10.3 0.1 15.9 14.7 ( o.p. ) 0.4 3.1 dia. +0.25 ?.05 1.65 dia. +0.1 0 3.64.1 0.8 9.3 9.7 10.6 side com terminal .187 quick-connect terminal .250 quick-connect terminal c no nc 1 3 2 ( p.t. ) 1.4 max. 10.3 3.95 39.45 ?.05 +0.25 3.1 3.4 22.2 2.8 1.8 27.8 20.2 2.8 0.15 0.1 3.2 6.35 1.55 dia. 6.4 4.75 3.1 dia. +0.25 ?.05 5.65 6.5 6 9.3 4.1 0.5 2.8 10.3 0.1 15.9 14.7 ( o.p. ) 0.4 c no nc 1 3 2 10.3 3.95 42.7 3.4 22.2 2.8 1.8 27.8 20.2 2.8 0.15 0.1 2 -0.05 +0.1 8.05 4.15 ?.07 +0.05 6.35 0.15 ( p.t. ) 1.4 max. ?.05 +0.25 3.1 2.8 10.3 0.1 15.9 14.7 ( o.p. ) 0.4 3.1 dia. +0.25 ?.05 1.65 dia. +0.1 0 3.64.1 0.8 9.3 9.8 10.6 2. short hinge lever 27.8 20.2 c no nc 1 3 2 22.1 0.5 ( p.t. ) 1.6 max. 10.3 5.0 39.45 ?.05 +0.25 3.1 13.5 3.4 22.2 2.8 1.8 0.15 0.1 3.2 6.35 1.55 dia. 6.4 4.75 3.1 dia. +0.25 ?.05 5.65 6.5 6.65 9.3 4.1 0.5 2.8 10.3 0.1 15.9 15.3 ( o.p. ) 0.5 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
am5 the dimensions other than drawn above are same as pin plunger type. the dimensions other than drawn above are same as pin plunger type. the dimensions other than drawn above are same as pin plunger type. 3. hinge lever 27.8 20.2 c no nc 1 3 2 35.8 0.5 ( p.t. ) 3.2 max. 10.3 5.0 39.45 ?.05 +0.25 3.1 13.5 3.4 22.2 2.8 1.8 0.15 0.1 3.2 6.35 1.55 dia. 6.4 4.75 3.1 dia. +0.25 ?.05 5.65 6.5 6.65 9.3 4.1 0.5 2.8 10.3 0.1 15.9 14.3 ( o.p. ) 1.0 mm general tolerance: 0.25 4. long hinge lever 27.8 20.2 c no nc 1 3 2 59.5 0.5 ( p.t. ) 7.5 max. 10.3 5.0 39.45 ?.05 +0.25 3.1 13.5 3.4 22.2 2.8 1.8 0.15 0.1 3.2 6.35 1.55 dia. 6.4 4.75 3.1 dia. +0.25 ?.05 5.65 6.5 6.65 9.3 4.1 0.5 2.8 10.3 0.1 15.9 15.3 ( o.p. ) 2.6 5. simulated roller lever r3 27.8 c no nc 1 3 2 32.8 0.5 ( p.t. ) 3.2 max. 10.3 5.0 39.45 ?.05 +0.25 3.1 13.5 3.4 22.2 2.8 1.8 0.15 0.1 3.2 6.35 1.55 dia. 6.4 4.75 3.1 dia. +0.25 ?.05 5.65 6.5 6.65 9.3 4.1 0.5 2.8 10.3 0.1 15.9 18.5 ( o.p. ) 1.0 20.2 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
am5 the dimensions other than drawn above are same as pin plunger type. the dimensions other than drawn above are same as pin plunger type. 6. short roller lever 27.8 20.2 c no nc 1 3 2 20.6 0.5 ( p.t. ) 1.6 max. 10.3 4.9 4.8 39.45 ?.05 +0.25 3.1 13.5 3.4 22.2 2.8 1.8 0.15 0.1 3.2 6.35 1.55 dia. 6.4 4.75 3.1 dia. +0.25 ?.05 5.65 6.5 6.65 9.3 4.1 0.5 2.8 10.3 0.1 15.9 20.7 ( o.p. ) 0.5 mm general tolerance: 0.25 7. hinge roller lever c no nc 1 3 2 34.2 0.5 27.8 20.2 ( p.t. ) 3.2 max. 10.3 4.9 4.8 39.45 ?.05 +0.25 3.1 13.5 3.4 22.2 2.8 1.8 0.15 0.1 3.2 6.35 1.55 dia. 6.4 4.75 3.1 dia. +0.25 ?.05 5.65 6.5 6.65 9.3 4.1 0.5 2.8 10.3 0.1 15.9 20.7 ( o.p. ) 1.0 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
am5 notes 1. fastening of the switch body 1) use ?t ?ister head m3 screws to mount switches with less than a 0.49 n? torque. use of screws washers or adhesive lock is recommended to prevent loosening of the screws. 2) check insulation distance between ground and each terminal. 3) when the operation object is in the free position, force should not be applied directly to the actuator or pin plunger. also force should be applied to the pin plunger from vertical direction to the switch. 4) the standard value of overtravel should be the range of 70% to 100% of the rated o.t. value. 2. soldering operations soldering should be accomplished in less than 5 seconds, with a 60 watt iron. care should be taken not to apply force to the terminal during soldering. 3. varience of operating characteristics when specifying the switch, allow +20% to the listed operating and release forces. 4. environment av oid using the switches in the following conditions; ?in corrosive gases, such as silicon gas ?in a dusty environment 5. for switching of inductive loads (relays, solenoids, etc.) 1) in order to prevent damage to contacts due to the occurrence of arcing, an arc absorbing circuit should be applied. 2) care should be taken that occurrence in ac load possibly shorten the expected life. 6. please assure the quality and reliability of the switch under the actual service condition. 7. it is recommended to use gold clad contact type in use of low-level circuit rating. 8. cover and body are press-?ted. once it is taken apart, it may cause change of characteristics. 9. cover and body are press-?ted. once it is taken apart, it may cause change of characteristics. use of connector the .187 quick-connect terminal and .250 quick-connect terminal accept the all kinds of 1 polarity connectors and the ?ositive lock connectors please contact the manufacturers directly. ?receptacle terminal .250 series .187 series ??ositive lock connector. (equipped with the lock construction of low insertion type) .187 type (1 polarity) .250 type (1 polarity) .187 type (2 polarities) .187 type (3 polarities) all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
product types contact rating: 0.1a, 6a, 11a, 16a (250v ac) te r minal shape: .187 quick connect terminal, .187 quick connect/solder terminal for other speci?ations, please consult us. dimensions and notes please refer to standard qv switches catalog for dimensions and notes. specifications please consult us for further information. miniature switches with high precision (contact gap: more than 1mm type) am5 (qv) switches conforms with the iec950 standards for secondary circuit insulation distance. assures a contact gap of at least 1mm can handle high-capacity loads on the secondary side that s-type size switches cannot high inrush and hard impacts resistant excellent operating position precision ul/csa/vde/semko/t?v approved compliance with rohs directive ?contact ratings (0.1 to 16 a) remark: the inductive load for dc should have a time constant of 7 ms or less. voltage resistive load (cos = 1.0) inductive load (cos ] 0.6 to 0.7) type 0.1a 6a 11a 16a 0.1a 6a 11a 16a 250v ac 0.1a 6a 11a 16a 0.1a 3a 6a 10a 125v ac 0.1a 6a 11a 16a 0.1a 3a 6a 10a 125v dc 0.1a 0.5a 0.6a 0.6a 0.1a 0.5a 0.6a 0.6a 0.1a type minimum load: 6v dc 5ma (resistive load) 12v dc 2ma (resistive load) 24v dc 1ma (resistive load) all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.

▲Up To Search▲

Price & Availability of AM51646C63N

	To Download AM51646C63N Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .